MICCROPATCH MC-753 AIR DRY PATCH FOR PLASTISOL COATINGS
Maskants * Stop-off Lacquers * Plastisols * Masking Waxes * Masking Tapes * Lay Out Dyes
Miccropatch MC-753 (Air-Dry, Black) is especiolly designed to allow easy and reliable repair of plastisol coatings. It is quick drying and its high viscosity reduces the need for multiple coats. Plating racks can be returned to service with minimum down time. Properly applied, Miccropatch forms a tough bond with plastisol and extends insulation life indefinitely. Miccropatch MC-753 (Air-Dry, Black) is made of the same essential ingredients as Plastisol. It is resistant to all plating solutions, alkaline cleaners at boiling temperatures, and acids. Miccropatch is also available in Green (MC-967).
INSTRUCTIONS:
To repair racks, cut away all loose material and remove any projecting electrolytic deposits. Wiping the area with Miccropatch Reducer will help assure adhesion. Flow Miccropatch into patch area and allow to dry one hour. Flow multiple coats of Miccropatch until patch level is even with surrounding area. Allow one hour to dry between coats. Because of high viscosity and special formulation, Miccropatch will attain maximum thickness with fewer coats than any other material produced. Permit overnight drying time after last coat.
MICCROPUTTY B; Heat Cure Patch for Plastisol Coatings
Many platers and rack manufacturers prefer to repair rack insulation with Miccroputty B. When proper equipment is available, this heat-cured patching material makes a repair which is difficult to tell from the original coating. Miccroputty B;, like Miccropatch, is made of the same essential ingredients as Plastisol, compounded into putty, for easy and convenient handling. It is resistant to all plating solutions, alkaline cleaners at boiling temperatures, and acids.
INSTRUCTIONS:
Cut away all loose material and remove any projecting electrolytic deposits. Paint area with C-1445 or C-1452 Primer and allow to dry. Place, in palm of your hand, enough Miccroputty "B" to fill patch area, and knead until soft and pliable. When primer is dry, press Miccroputty "B" carefully into patch area, being sure to eliminate any air entrapment. Smooth patch level with your thumb. Apply heat with propane torch or heat gun. Note that patch will first turn dull and then shiny, when cured. Heat temperature should be 350_F. to 400_F. Be very careful not to heat too quickly as this may cause cure at surface only, and subsequent loss of adhesion. A little practice will assure good cure technique.
Developed and manufactured by experienced platers
Other products in the category Chemicals for Special Applications / Plating:
Anodes Zinc Metal Balls 99%+ 50 Lb Box -- NEW CUSTOMERS (CALL, EMAIL or QUOTE) for PRICE
Antifoam(tm) 1410 40 Lb Pail -- NEW CUSTOMERS (CALL, EMAIL or QUOTE) for PRICE
Antifoam(tm) 1410 441 Lb Drum -- NEW CUSTOMERS (CALL, EMAIL or QUOTE) for PRICE
Cadmium Oxide Technical Grade 50 Lbs Pail HAZMAT -- NEW CUSTOMERS (CALL, EMAIL or QUOTE) for PRICE
Chrome Etch Type 1020 1Gal Bottle HAZMAT C51020 -- NEW CUSTOMERS (CALL, EMAIL or QUOTE) for PRICE
MICCRO SH-110 VOC FREE 1 Gal Can
MICCRO SUPER XP-2000 STOP-OFF LACQUER 1 Gal Can
MICCRO SUPER XP-2000 STOP-OFF LACQUER 5 Gal Can
MICCROMASK STOP-OFF LACQUER 1 Gal Can
MICCROMASK STOP-OFF LACQUER 5 Gal Can
MICCROPATCH MC-753 AIR DRY PATCH FOR PLASTISOL COATINGS BLACK 1 Gal Can
MICCROPEEL LACQUER 1 Gal Can
MICCROSHIELD STOP-OFF LACQUER 1 GAL Can GCI# MS5901 Tolber HAZMAT
MICCROSHIELD STOP-OFF LACQUER 5 Gal Can
MICCROSHIELD STOP-PEEL REDUCER 1 Gal Can
MICCROSHIELD STOP-PEEL REDUCER 5 Gal Can
MICCROSTOP STOP-OFF LACQUER 5 Gal Can
MICCROSTOP STOP-OFF LACQUER (1 Gal Can) M59012 Tolber HAZMAT
MICCROSTRIP "A" 1 Gal Can
MICCROSTRIP "A" 5 Gal Can
MICCROTAPE # 1210, 1in 1 Each Roll
MICCROTAPE 3/4" BLACK 1 Each Roll HAZMAT
MICCROTAPE CEMENT 1 Gal Can
MICCROTEX LACQUER 1 Gal Can
MICCROTEX/MICCROPATCH REDUCER 1 Gal Can
MICRO XP-2000 LR LACQUER 1 Gal Can
PLASTISOL BLACK 1 Gal Can -- Product Specs
PLASTISOL BLACK 5 Gal Can -- Product Specs
PLASTISOL ORANGE 1 Gal Can -- Product Specs
PLASTISOL ORANGE 5 Gal Can -- Product Specs
SUPER XP-2000 REDUCER 1 Gal Can
T-100 PLASTISOL PRIMER 1 Gal Can
T-100 PLASTISOL PRIMER 5 Gal Can
T-100 PLASTISOL PRIMER REDUCER 1 Gal Can -- Please reference Part # M59011 when ordering
T-100 PLASTISOL PRIMER REDUCER 5 Gal Can -- Please reference Part # M59111 when ordering
XP-420 LVOC L.R. 5 Gal Can
|
|
|||||||||||||
|
|||||||||||||